FAQS
HOME > BLOGS > FAQS >
Cost comparison of centrifugal dehydrator, belt filter press and plate-frame filter press Cost comparison of centrifugal dehydrator, belt filter press and plate-frame filter press
Investment cost: If the raw water needed to be treated is 2000 m3/day and the sewage treatment plant producing 8-10 t/d dry sludge is concentrated into sludge-water mixture with a solid content of about 3%(the suspension in the water of dif...
details
How to Realize Continuous Desliming of Sludge Dewatering Machine How to Realize Continuous Desliming of Sludge Dewatering Machine
Sludge treatment is an important link in the sewage treatment process of the laminated screw sludge dewaterer. Like the excretion of a digestive system, if the waste material can not be metabolized in time, it will affect the normal physiol...
details
Advantages of the sludge dewatering machine Advantages of the sludge dewatering machine
1. Wide range of applications Can be widely used in municipal sewage, food, beverage, slaughter breeding, printing and dyeing, petrochemical, paper, leather, pharmaceutical and other industries of sludge dewatering. The unique dehydration p...
details
Structure and working principle of sludge dewatering machine Structure and working principle of sludge dewatering machine
Structure and working principle of sludge dewatering machine Construction principle: Multi-Disk Screw Press main body consists of multiple fixed ring, swimming ring and spiral filter. The sludge concentration and press dewatering work is do...
details
Several failure analysis of plate and frame filter press Several failure analysis of plate and frame filter press
First, the reason for water seepage between the plates 1, low hydraulic pressure 2, filter cloth pleats and filter cloth with holes 3. The sealing surface has a block. The method of treating water seepage between the plates and frames is re...
details
Multi-Disk Screw Press setting method Multi-Disk Screw Press setting method
Multi-Disk Screw Press setting method: The spray stop time (OFF) and run time (ON) for cleaning can be set separately. The stop time is set by the green knob and the running time is set by the red knob. Please set it to stop for 15 minutes...
details
How to adjust the moisture content of Multi-Disk Screw Press through the back plate? How to adjust the moisture content of Multi-Disk Screw Press through the back plate?
How to adjust the moisture content of Multi-Disk Screw Press through the back plate? The operation method of reducing the water content by the back pressure plate: the gap of the back pressure plate is adjusted to be small, which increases...
details
How to reduce the moisture content of Multi-Disk Screw Press? How to reduce the moisture content of Multi-Disk Screw Press?
How to reduce the moisture content of Multi-Disk Screw Press? The water content of this sludge dewatering machine is generally 80%, and the reasons for the high water content are generally as follows: Objective reasons: Sludge properties: T...
details